Translation missing: en.layout.drawers.browse
SHOPPING BAG
Welcome to Dennistons. Free Shipping on orders over €60 within the Republic of Ireland
Cart 0
Welcome to Dennistons. Free Shipping on orders over €60 within the Republic of Ireland
Cart 0
Vapex VTE500 PII NIMH Charger for 4.8V/7.2V/8.4V/9.6V/12V Batteries

Vapex VTE500 PII NIMH Charger for 4.8V/7.2V/8.4V/9.6V/12V Batteries

€21,99 €0,00
We have 1 in stock.
Out of Stock.
Tax included. Shipping calculated at checkout.
  • This is the best value smart charger we stock.
  • Charges all 4.8V/7.2V/8.4V/9.6V/12V NiCd or NiMH battery packs.
  • The charger is designed to charge 4-10 cells of a nickel-metal hydride or nickel-cadmium battery with a standard Tamiya connector.
  • Charges a 1600mAh battery in a little over 3 hours.
  • This charger is equipped with a microprocessor that can distinguish how many cells are being charged to cut off the charging at the right moment and prevent the battery from overcharging.
  • The charger is easy to use and no additional adjustments are required.
  • The charger has a small male Tamiya connector. 
  • Rated input voltage and current frequency: 240VAC 50Hz
  • Rated voltage (output): DC18.0V + -5%
  • Rated current: DC500mA
  • Number of cells in the battery: 4 ~ 10 cells
  • No-load charging voltage (output): DC 23.5V Max
  • Current: 60mA Max
  • Short circuit and reverse polarity protection
  • UK plug
  • Product features:
  • Charges 4~10 Ni-MH/Ni-Cd battery cells with standard Tamiya plug
    Microprocessor control system (For protection and safety).
    Battery life is well protected by ΔV “delta V” detection (change in battery voltage) and a timer.
    LED diode informing about the battery charge status
    Red color - fast charging
    Green color - battery charged and maintenance charging
    Flashing Red and Green colors - short
    Flashing red - Error or reverse polarity
    SafetyFeatures:
    - ΔV charging cut-off function

    User manual: -
    Connect 1 battery (NiMH or Ni-Cd) with 4~10 cells and Tamiya male plug to the Tamiya female connector of the battery.
    Make sure the male plug is properly connected.
    Connect the charger to a power socket.
    The LED will glow red while the batteries are charging. After charging, the diode will turn green. At this point, the batteries are ready for use. At this point, the charger switches to the mode that maintains the battery's charge state
    Disconnect the charger and the batteries from the electrical outlet
  • Mechanical specifications:
    Plastic housing: 70 × 40 × 28mm
    DC wire output: 1500mm × 26AWG × 2C
    Working temperature: 0~35℃
    Short circuit: 20mA
    Weight: 90g
  • Important safety instructions
  • Before charging, read the instructions.
    This charger is designed to charge nickel-cadmium and nickel-metal hydride batteries. Attempting to charge other types of rechargeable batteries or non-rechargeable batteries may result in damage to the charger and personal injury
    Charge only one type of battery (Ni-Cd or Ni-MH) at a time.
    Do not expose the charger to rain or moisture. For use indoors.
    Unplug from the mains when not in use.
    Never use an extension cord or any additional plugs not recommended by the manufacturer, which may cause a risk of fire, electric shock or personal injury.
    Do not use the charger if it has been damaged or has received an electric shock. Take it to a qualified service technician for repair.
    Do not disassemble the charger. Improper reassembly may result in risk of electric shock or fire.
    Unplug the charger from the socket before cleaning or handling the charger

Share this Product